Listing is for 1 snowboard / wakeboard wall mounting kit. Hangs 1 board on the wall. Check out our other listings for multible racks and your choice of 6 different colors! Board Mounting Kits are made form Strong Steel. Great for hanging boards with bindings. With hang Tight Kits you can hang your boards horizontally or at a slant up to 45 degree. Strong steel construction but safe, smooth edges. Kits are coated with highly Durable neoprene foam protects you board from any type of damage. Kits can be mounted indoors or out and are water resistant!. Easy 3 step insulation. Quality mounting hardware and instructions included with the kit. You boards can be removed from the wall with easily and at any time. Get a deal on a rock star rack!. Makes a great gift!
The Original Hang Tight Racks "Hang it right with Hang Tight" TM. . One purchase Hangs 1 snowboard or wakeboards. Please note Clips are made of steel not real carbon fiber although the carbon fiber look real. Satisfaction Guaranteed!
Strong steel rack
Coated with neoprene foam to protect your boards finish.
Durable and stylsih Black Finish. Easy to install and use
This rack will effectively store up to three snowboards on the wall - Great way to Organize the house. Simple, effective design to store, organize, and display all your snowboards. The rack is very strong but also lightweight because it is made from ABS plastic. Rack is easily stackable to hold 6, 9,or 12 boards. This comes with well written and diagramed instruction to make sure you mount the rack properly. Rack can be easily painted or spray painted to match room décor. This snowboard rack comes with both screws and drywall anchors for easy installation anywhere in your house or garage. As a word of caution, with today's larger high back snowboards bindings sometimes it is very difficult to fit a snowboard on the middle level. Measure your board and bindings with the bindings folded down and compare to the photo that has dimensions of the rack. A lot of people use the center level for a board without bindings, skis, a skateboard, a longboard skateboard, a rip stick, or long handled tools. Great for the gar...
Made by the leaders in action sports storage, StoreYourBoard, this rack will store up to three pairs of skis on the wall - Great way to Organize the house. Simple, effective design to store, organize, and display all your skis. The rack is very strong but also lightweight because it is made from ABS plastic. Rack is easily stackable to hold 6, 9,or 12 boards. This comes with well written and diagramed instruction to make sure you mount the rack properly. Rack can be easily painted or spray painted to match room décor. Rack can also be used to store ski poles or other board likes snowboards and skateboards. Some newer skis have larger, thicker bindings. You might not be able to fit 3 pairs of these on the rack. In this case it would be better to store a pair of skis on the top level and a pair of skis on the bottom level and then poles and/or other boards in the center slot. Great for the garage, closet, hallway, mud room, child's room, or ANYWHERE! Rack comes as two arms that can be spaced to accommodate you...
COR is a Family run company of Surfers and Skaters. Trust the brand that lives the life you do! Now BIGGER and STRONGER, buy from the trusted brand in Action Sports. Finally a place to store your skateboard while still keeping your home looking good. This beautiful skateboard storage rack is made from eco-friendly sustainable bamboo and works with all kinds of skateboards, longboard, penny boards, everything! Simply mount on the wall with the included hardware and your board up and you home is clutter free! No more tripping over boards! Comes with a LIFETIME WARRANTY and a 100% money back guarantee. We'll even pay the postage if you're not happy. The COR Skate rack will hold any size skate. Easy to install and all hardware included. Please take some time to read some of our seller reviews. With over 14 years making board racks, you know you are buying from the best! Made by surfers and skaters!
Manufacturer: Pro Board Racks
Brand: Pro Board Racks
Features: Hand crafted from Pacific Southwest Redwood. Each piece has unique character; Routed finished edges; Solid construction. Can hold up to 100 lbs; Holds boards with or without bindings; 29 inches top to bottom; Rack set weighs 4 lbs; Slots fit nearly every snowboard, skateboard or longboard (3.75 inces deep and 1.25 inches thick); 4 pre-drilled screw holes and mounting hardware for easy hanging; Holds up to 4 boards
StoreYourBoard's Ski and Snowboard Storage Rack is the perfect rack to hold BOTH your skis and snowboards. Store Multiple Boards: So many families and even individuals have both skis and snowboards--No longer do you need two separate racks to store them! Versatile Design: This Ski and Snowboard Rack is a simple, effective design to store, organize, and display all your skis and boards. The rack is very strong but also lightweight because it is made from ABS plastic. Rack is easily stackable to hold 6, 9,or 12 boards. Easy to Install: Comes with well written and diagramed instruction to make sure you mount the rack properly. Rack can be easily painted or spray painted to match room décor. Great for the garage, closet, hallway, mud room, child's room, or ANYWHERE! What's in the Box: 2 Rack Sides, 4 Mounting Screws 4 Drywall Anchors, and Instructions for Installation Dimensions: Length =16.5" Each rung of the rack is 6.5" long to hold your board Will hold most boards under 12" wide.
Pro Board Racks Longboard Wall Rack Mount (Holds 5 Board)
Manufacturer: Pro Board Racks
Brand: Pro Board Racks
So you just finished a great day carving up the streets on your longboard. Or you just returned from school or work on your skateboard. You don't want your new baby to get dinged up in the corner when someone kicks it or the dog knocks it over. Get your longboard out of the corner and mount it on the wall. By using a longboard wall mount rack you save space in the garage, basement, dorm room, or living room. Also, your longboards or skateboards will look impressive racked neatly on display. This longboard wall rack is hand crafted from pacific southwest redwood which has a beautiful natural red hue.
The Cinch is the most affordable, easy-to-use, and minimalistic snowboard wall mount on the market. Designed to be easy-to-install and easy-to-use, the Cinch is everything you need in a snowboard rack in an ultra-affordable package. At the core of the Cinch are the abrasion-resistant SBR rubber bumpers. These bumpers provide a sturdy and rigid way to secure your board in place, but are soft enough to be safe for your board's edges. The Cinch is designed to hold your board vertically and flat up against the wall. This means it takes up practically no more space than your snowboard! You can store your snowboard with or without bindings attached. This means it is a great way to show off your board AND be a quick-access storage rack for your daily rider! The Cinch is made by StoreYourBoard - the leader in action sports storage equipment.
The Naked Snow is a compact, easy-to-use storage system for wall mounting your snowboard. Its sleek, anodized aluminum finish and minimalistic design means the focus is on your board, not the rack. This makes the Naked Snow a great option if you're looking to show off your snowboard's graphics. This rack will easily a hold a board with or without bindings. If you want to show off the top sheet of your snowboard, then you can keep the bindings on. If you want to show off the bottom graphics, then you'll need to take the bindings off so that the board fits properly in the rack. Each rack comes heavily padded with a felt liner that will protect your snowboard's edges from getting damaged. Since the Naked Snow comes with two separate arms, you can mount them at any distance apart. This means it is customizable to fit any length or type of snowboard - kid's, women's, and men's snowboards all fit! Includes 4 mounting screws and 4 drywall anchors.
Manufacturer: Del Sol Racks
Brand: Del Sol Racks
SKBA4 Features: -Skateboard.-Material: Pine.-Stores four (4) skateboards.-Two helmets in a 30 degree angle.-Mounts on any wall: home, garage, basement.-Hardwood birch dowels (pegs).-All mounting hardware and screw hole plugs provided.-Arms extend 8'' perfect for longboards and skateboards.-Great for organizing and displaying boards when not being used. Construction: -Solid frame construction built to last. Color/Finish: -Stained finish with routed and sanded edges.-Golden pecan stain for a great finished natural look. Dimensions: -Dimensions: 27'' H x 12'' W x 9'' D.