VOLA Side Bevel File Guide Tuning Winter Sports Tool Ski and Snowboard Pocket Edge Tuner 88 Degress and 89 Degress
Perfect for a lower cost ski base edge tool to work well and help you get a best sharpening result. The sides will like a new from the factory. Before you start mark the side edge with a sharpie, start the tool at the lowest angle and see if it removes the marking on your edge. Raise the angle step-wise and repeat until it removes the mark. That is your angle.
RaceWax World Cup Ski Vise All Metal Three Piece 90 mm
RaceWax Ski Vise All Metal Three Piece 95 mm Heavy-duty, all-metal construction.Jaw opening ranges from 40-95 mm. Can be used on skis wider than 95 simply by clamping to the binding instead of the sidewalls - actually faster and easier!60 mm wide gripping length on center jaws (this is the length of the black grip seen on the center jaw) offers superior stability for skis.Height adjustable end supports.End supports rotate in two directions that offer multiple angle settings for maximum flexibility, increased comfort, and custom visibility while tuning.The clamps that fix to the tuning bench open to 2.25" (this is the same for all brands of vises).One pair (two) ski brake retainers included.Add Swix/Toko adapters (MR-8077 or MR-8051) to convert for snowboard or Nordic tuning; they snap on the end supports.
Base-Side Bevel File Guide SKS Multi Tool + 5 DMT diamond stones with file
Side and base edge bevel multi tool with a full set of five DMT diamond stones AND includes a file.This one tool is all you need to sharpen and bevel your edges. Dial a precise angle from 0 degree to 5 degrees in 0.5 degree increments.Five diamond stones included!Use the gray for serious repairs and removal, black for cutting, the blue to maintain the sharpness and the red/green to fine sharpen and polish. Use wet.Bonus Benefit for this tool: If you don't know what base and side angles your ski/board are set to, this tool can help you find them. Before you start mark the metal edge with a sharpie, start the tool at the lowest angle and see if it removes the marking on your edge. Raise the angle step-wise and repeat until it removes the mark. That is your angle! Record the base/side angles for future reference.
RaceWax Quick Tune Ski Snowboard Wax Tuning KitWill tune both skis and snowboards!Edge Beveler for 88 / 90 side edge angles;Two-sided metal cutting file included with edge tool;40 g bar of our best quality All Temperature Wax (enough for about 2-4 waxings);5.5 inch, 4-mm thick precision ground Triangle Wax Scraper with a corner notch for edge cleaning;Brass file brush;Metal Scraper with vinyl storage sleeve;One Clear P-Tex (8 mm diameter, about 190 mm long (7.5 inches) long);One Black P-Tex (8 mm diameter, about 190 mm long (7.5 inches) long);Two Brake Retainers;Non-abrasive Fibertex pad for buffing after scraping waxall in a zippered Cordura pouch with lots of storage pockets.
Color: Wintersteiger Green
Ski Vise Pro has a wide jaw for holding powder skis. The 90mm rubber-lined holding surface opens from 38mm to 150mm, tune your front-side carvers or your powder skis for the deepest days. Holds ski in two positions, flat for waxing and upright for perfecting your edges. With this vise, you will never need another vise.
XCMAN All Metal Alpine Ski Vise For Ski Tuning and Waxing Adjustable Angle and Height Durable and Stable
XCMAN All Metal Alpine Ski Vise For Ski Tuning and Waxing Adjustable Angle and Height Durable and Stable Good Value. 3-piece set. Included 1 center clamp,2 end supports. We extra offered 2 brake retainers to you. High quality all metal and rubber construction material to keep durable and stable. Multiple angle settings for side edge tuning allow for increased comfort and visibility while tuning and waxing.
Toko Snowboard Board Grip Vise 2.0This is a sturdy, two-piece metal snowboard vise designed to provide superior strength, stability and durability; a great choice for use in home or pro workshops.For waxing, each support has two locking sliders to adjust the width from 8.5 to 10.75 inches and are topped with grip rubber to provide good cushioning and resistance.To sharpen, an adjustable slider will lock to firmly hold your board vertically for side-edge filing & beveling. The vise attaches to workbenches or tables (up to 2.25" thick) with built-in adjustable clamps.